Product number: 22000128
EAN: 4260341072975
Stock: 1390
Product information "Belt reel 1" incl. hose clamp"
The belt reel enables guided and controlled rolling up of the ribbon 20 mm.
Thanks to the double-shell design, later assembly in the installation is possible. The belt pulley is fixed on both sides of the drive shaft with two hose clamps.
The belt pulley can be used for pipes with a diameter of 32 to 34 mm.
Login
Customers who bought this item also bought:
PES belt reel 20 mm x 10 m
Our PES belt reel is used for the construction of fall ventilation in greenhouses but it can also be used in other industries for example lift and drop-down solutions.The reel is usable in indoor and outdoor applications as well as it got a high uv-stability.
€18.90*
Reel chain drive 1:16 - 70 Nm - chain: 2m
Chain: 2 m
Our reel chain drive is ideal for the following areas:all ventilations and energy screens without a power supply connectionside ventilations which are installed increased and not accessible with the awning cranksmall to medium-sized plants in greenhouse, stable- and hall construction He convinces with these characteristics:easy to maintain and less susceptible to climate influences in the greenhousepractical directly mountable complete solution (worm drive, sprocket with chain guide and chain): can be quickly connected to the drive shaftattractive price-performance ratio Technical Information about our reel chain drive:Gear ratio of the worm drive: 1:16 (70Nm)The Sprocket is made with impact-resistant plastic
€209.90*
Manual drive R17 with hand crank (Gear ratio 1:16)
Our hand drive comes along with a gear ratio of 1:16. 1-inch shafts can be moved with the supplied hand crank and the separately available adapter. The load limit of our manual drive is 70 Nm.
€169.90*
Adapter 1" for manual drive - screwable
This adapter connects our manual drive system with an 1 inch tube. You can connect the pre-drilled shaft and the hand drive with a m8 screw.
€16.49*
U-joint incl. Adapter up to 1" shaft
The cross joint make it possible to the bend the drive shaft up to 34 degrees.The special feature of this connection is that the drive shafts are via a screwdriving and not - as usual - by heat sealings connected.This construction is very stable, the screwing withstands higher torsional forces as well as corrosion is avoided.In addition you benefit from a fast assembly.The cross joint can be connected and used with our manual hand drives without an adapter.
€59.90*